Watching a mold infestation taking over your household can be devastating. It has the potential of repelling people from visiting your house. More importantly, it can make you disgusted and uncomfortable about living in your own home as well. Besides that, mold growth poses health threats to you and your pets, especially if you have asthma.
The musky scent, safety hazards, and uninviting atmosphere all together make it essential for you to look for a permanent solution. You can try organic solutions, but most people become frustrated with this option because of recurring mold infestations.
There’s no need for you to get intimidated because thousands of products will help you eliminate this problem. And since deciding on a single one can be quite daunting, I’m going to introduce you to the top 10 mold and mildew removers and simplify the process for you.
So, buckle up and get ready to become an expert on mold and mildew removal.
- Top 10 Best Mold Armor Reviews 2022
- Mold Armor House Wash Reviews 2022
- 10 Best Water Based Polyurethane for Hardwood Floors 2022
- 12 Best Toilet Paper Holders Reviews 2022
- Top 10 Best Toilet Paper For Septic Tanks Reviews 2022
Top 10 Best Mold & Mildew Removers Reviews 2022
1. RMR-86 Instant Mold And Mildew Stain Remover Spray
The product that tops today’s list of the best mold and mildew remover is none other than the RMR-86. You’re all set for a satisfying cleaning experience because this spray will get rid of the darkest mold stains for you!
Unlike other brands, the RMR-86 won’t fill your room with a damp smell after usage. A pleasant scent will welcome you after the remover works its magic. It doesn’t matter whether the stains have been embedded in the surface for a long time or have just settled.
This fast-acting spray will attack the tricky places in your houses, such as the area under your kitchen or bathroom sink, grout lines, shower doors, and bathroom tiles. On top of that, I’m sure you’ll be glad to know that this mold remover is so powerful that it doesn’t need you to scrub the surface at all!
Just spray it onto your desired surface and watch the unwanted stains disappear magically. One of the most helpful characteristics of this mildew remover by RMR is that you can use it on many surfaces, including upholstery, carpets, tiles, walls, and even on showers.
- Less energy consumption because you don’t need to scrub.
- Pleasant smell.
- Works on a wide range of surfaces, including but not limited to upholstery, brick walls, and vinyl siding.
- Targets and removes stains that are deep inside the material.
- Quick action.
- Zero preparation time is needed because the mixture is ready to use.
- Inhalation of or contact with the product can trigger health issues.
2. Wet & Forget Roof Siding Cleaner For Easy Removal Of Mold and Mildew.
Get ready to meet the best seller mildew stain remover that you can get your hands on. The Wet & Forget 805048 lives up to its name because the only task you’ll have to complete is applying it. After that, you may as well forget about it since that single step will result in the removal of mold, mildew, and algae stains from a range of different surfaces.
I’d say that one of the things that set it apart from other brands is that it doesn’t contain bleach or phosphates. Furthermore, this stain remover bottle is not acidic, which makes it safe for you to use.
All you have to do is spray it onto the surface and leave it there. You don’t have to put in efforts to either scrub or rinse the place because the solution will do its work regardless. This means you’ll have more time to spare and can therefore attend to more important chores.
This hose end bottle can be sprayed up to 30 feet and is quite useful when dealing with second-story buildings. It will also be of great help when you’re working in hard-to-reach places since it is immensely difficult to scrub or rinse those areas. Each bottle can cover approximately 2000 square feet!
- No scrubbing.
- No rinsing.
- Works on mold, mildew, and algae.
- Hose end sprayer helps reach the difficult nooks and crannies.
- You can’t re-fill the container.
3. Wet And Forget 10587 1 Gallon Moss, Mold, And Mildew Stain Remover
Cleaning will never hamper your business again because your comfort is Wet And Forget’s priority. The 10587 easily gets rid of mold, mildew, and moss, too, without any effort from your end. All you have to do is take a few seconds out of your busy schedule to spray the product.
After that, this mold killer will make sure that the deepest mold stains of that place have been removing. The elements of this stain removal solution are biodegradable and are selectively chosen for specific surfaces. As a result, not only is it environment-friendly, but it is also quite useful in doing its job.
You can use it on any outdoor surface without fear of damage because the 10587 doesn’t contain bleach. On top of that, it is also non-caustic and non-acidic, which makes sure you don’t have any safety hazards.
This bottle contains 1 gallon of concentrated mold remover that you can apply after dilution with water. Diluting the solution makes up to 6 gallons of cleaning solution that will pierce through the stains and make them disappear forever.
Whether it’s aluminum, concrete, siding, brick, or roof, you won’t have to rinse or scrub. I’m sure that this product by Wet And Forget will become a permanent member of your inventory.
- One-step process.
- No scrubbing.
- You won’t be able to purchase this product if you’re in California.
4. RMR-141 Disinfectant Spray Cleaner, Kills Bacteria And Viruses, Fungicide Kills Mold & Mildew.
It is my pleasure to introduce you to one of the strongest mold killers you’ll ever encounter. It is none other than the RMR-141, a fungicide that also has the properties of a disinfectant spray. Incorporating a powerful formula in this 32 Oz bottle makes it sufficient to keep your house free of both bacteria and mold.
On top of that, it has been tested and approved by authorities around the globe. As a result, it has earned the title of the only EPA-registered disinfectant. To make things more interesting, the particles in this mold removal solution are positively charged. Therefore, they can easily stick to and thus get rid of negatively charged dirt or bacteria.
Not only is it a mold killer that inhibits growth, but it also makes sure the unpleasant smell is eliminated. This spray bottle effectively eradicates 99% of all kinds of household viruses and bacteria that can make your house stink.
Moreover, you can use this multifunctional spray for institutions, hospitals, and commercial spaces as well. This is because the RMR-141 can target and eliminate 141 species of microorganisms.
- Mighty formula.
- Mold killer and disinfectant.
- A positively charged solution easily traces negatively charged bacteria.
- Works on more than 141 kinds of microbes.
- You can use it on several different surfaces.
- Inhibits growth.
- Some customers have commented that the odors are not removed permanently.
5. Star Brite Mold And Mildew Stain Remover+ Cleaner.
The next product on our list will surely snatch the title of your favorite cleaner because Star Brite never lets you down. Once it comes in contact with any kind of mildew or mold, an immediate reaction occurs. A light scrubbing will make the stain vanish within a short period.
You’ll be glad to know that this remover’s formula is too alkaline, which makes it cleaner as well. This mold and mildew remover features chelating agents that pull out deeply settled dirt from the surface.
This cleaner also works on the affected area better because of the buffered bleach that it contains. As a result, it is the most suitable for use on marine upholstery and acrylic fabrics. In addition to that, greasy stains will also vanish within the blink of an eye because of the formula’s surfactants.
It will be the perfect stain remover for tile and grout, drywall, fiberglass, vinyl upholstery, concrete, roofs, and wood, among many others. Its concentrated formula makes it suitable for professional use in commercial areas because of the powerful result.
- Buffered bleach.
- Contains chelating agents to remove stubborn stains.
- Strong formula.
- Ideal for commercial use.
- Made in the USA.
- It won’t work on canvas-like materials.
6. RMR-86 Instant Mold And Mildew Stain Remover Spray
The RMR-86 is a revolutionary cleanser for contractors. The 128 oz bottle of this fast-acting formula makes the process economical by reducing the time consumption and the cost. Whether it is black mold or mildew, the stubborn stains left by all kinds of microorganisms will be removed within seconds.
Unlike other sprays that leave behind unpleasant, damp scents, the RMR-86 will not get any residual smell. Therefore, it is an excellent choice for use in toilets and kitchens. Getting rid of those disgusting dirt particles that are trapped between your bathroom tiles and grout and under your kitchen sink will be more comfortable than ever.
All you have to do is spray the product onto your desired area and wait until it works its magic. There’s no need for you to scour the surface because the strength of this mildew remover is enough. You’ll see that the dirty spot disappears on its own.
Apart from that, the versatility of the RMR-86 is commendable. You can use it on a variety of different hard surfaces, including but not limited to vinyl sidings, bathtubs, concrete floors, wood, brick walls, and decks. I can assure you that this is one of the best mold and mildew removers out there!
- Quick action.
- Saves your energy because you don’t need to scrub the surface.
- About five times more potent than its rivals.
- Removes the most deeply embedded stains effortlessly.
- Ready to use formula makes the process easier.
- It May contain harmful chemicals and, therefore, can make you sick.
7. CLR Mold And Mildew Stain Remover
The CLR Mold & Mildew Clear is one of my most beloved items on this list. It comes in a 32-ounce trigger spray bottle that greatly boosts the efficiency of the procedure. Don’t worry about missing any nook and cranny because the trigger handle makes sure that no matter where the affected area is situated, the stain remover reaches it.
Safety hazards will not concern you anymore because of the bleach-free formula of this mold killer. Even though it doesn’t contain this harmful chemical, it works quite rapidly to eradicate mold and mildew from several different surfaces.
On top of that, the product’s foamy consistency makes sure that there aren’t any splatters. Thus, the solution stays in contact with the desired area for a longer time, making the mold removal more effective.
You can put the CLR mildew stain remover to use on ceramic tiles, laminated countertops, fabrics, glass, concrete, hardwood floors, painted walls, outdoor furniture, and baseboards. Along with that, the mighty formula also removes mold and mildew from showers, automobile tires, grout, fiberglass, wood, and bathroom surfaces quite successfully.
- Mighty formula.
- Trigger spray.
- Foamy consistency.
- The multipurpose spray works on a large variety of hard and non-porous surfaces.
- The bleach-free formula keeps you safe from any kind of safety hazard.
- Some customers have alleged that even though it’s good at the cleaning part, it doesn’t remove stains.
8. Professional Disinfecting Mildew, Virus, And Mold Killer
If you’re looking for a solution that kills microorganisms such as mold and mildew and leaves a refreshing aroma behind, then this is the product for you. This Lemocide can tackle the worst kind of mold and mildew infestation because of its powerful industrial-grade formula.
Not only that, but this cleaning product also kills a multitude of viruses and bacteria that may make you sick. This multitalented product deep cleans almost any surface you apply, including metal, porcelain, bathroom floors, tables, chairs, walls, steel, and ceramic.
Therefore, you can use this non-abrasive mildew killer on almost any non-porous surface without damaging it. The manufacturers are so sure about this cleaner’s potential that they offer you a full reimbursement of the item within a month of the purchase if you’re not satisfied with it.
The revitalizing lemon scent that it leaves behind will be a treat for your nostril. Besides that, its disinfecting capabilities make it an excellent choice for use in institutions such as municipalities, hospitals, hotels, schools, and universities. I can assure you that the professional disinfecting mold killer will become one of the beloved products in your inventory.
- Kills a multitude of microbes, including bacteria and viruses.
- Works on steel, porcelain, bathroom tiles, and a variety of other surfaces.
- Guarantee of a refund within 30 days if it doesn’t work.
- Suitable for use in commercial spaces such as hospitals and schools.
- Deodorizes the area with a refreshing lemony aroma.
- It comes in the form of a concentrate, so you’ll have to dilute it with water before applying it.
9. RMR Brands Complete Mold Killer & Stain Remover Bundle
This one contains a combination of mold killers from RMR. They have been a trusted supplier of such cleaning equipment for quite a long time, and I can assure you that they live up to their claims. The kit contains two bottles; one is a stain remover, while the other kills mildew and mold while disinfecting the area.
The RMR-86 is an instant mold remover that attacks intense stains and spots immediately after contact. Therefore, the gross moldy area between your bathroom tiles and that under your kitchen sink will no longer remain that way.
On the other hand, the RMR-141 RTU is a disinfectant and fungicide that terminates toxic mildew and molds. Not only that, but it also inhibits further mold growth by destroying them right from the roots. On top of that, it also kills other microorganisms such as bacteria and viruses and keeps you away from diseases.
Since the formula is ready to use, you won’t need to prepare it before the application. Along with that, there’s no need for you to scrub the area because the solution is powerful enough to work independently. You can use it on several surfaces such as bathtubs, carpets, upholstery, concrete floors, decks, and brick walls, among many others.
- Acts fast.
- Works on its own without scrubbing the affected area.
- Disinfects and destroys 99% of disease-causing germs.
- Inhibits re-growth.
- Trusted brand.
- It contains an odor similar to bleach, which may be irritating for some people.
10. Concrobium 25326 Mold Control Spray, 32 Oz
The final product that earned a place in the best mold and mildew remover is the Concrobium 25326. It is a spray that not only kills mold but also controls its growth in the future. Along with that, you’ll also get rid of the musty and damp smell that accompanies the mold.
As it dries, the solution targets and attacks mold spores. Eventually, it turns into a barrier between the surface and mold that you can’t see with the naked eye. Since the product doesn’t contain any smell, there are no chances of any discomfort that you may face while using it.
You’ll be glad to know that the Concrobium 25326 doesn’t contain any toxic or harmful materials like bleach. Therefore, it is entirely risk-free to use. Besides that, the 25326 is compatible with a diverse range of hard surfaces. However, you can’t use it on porous materials.
Using this cleaner will also save a lot of your time and energy since it doesn’t require scrubbing or rinsing. It allows you to finish the job in a one-step process where you just need to let the product dry after application. This item by Concrobium is suitable for use on boats, cars, and homes.
- No rinsing or scrubbing makes the procedure quite comfortable.
- Eradicates disgusting existing mold and mildew within a short period.
- Protects the surface from a further attack of molds.
- Doesn’t smell.
- The absence of harmful chemicals makes it safe to use.
- Do not disinfect or sanitize the surface.
Mold Remover Buyer’s Guide
Discovering molds at your home or workplace can be terrifying. Not only are these microorganisms disgusting, but they also pose a severe threat to your health. You need to terminate them as soon as possible if you prioritize your safety and keep your surroundings clean.
Since there are many different mold removers available in the marketplace, it’ll be a daunting task to pick one. To do this, you must have a clear idea about the type of mold and mildew you’re dealing with. This is because each species of mold require specific chemicals to perish.
Therefore, if you end up with a mold killer that doesn’t work on the one you have at your household or office, it’ll be a complete waste of money. This is why I’d suggest you gather knowledge about the type of mold you are dealing with.
The more you know about the species, the easier it’ll be for you to conclude how to terminate it. Hence, you should do extensive research and list the chemicals and formulas that work best.
After that, you should match the list of the ingredients with that of the different products you’ll come across. Choose the one that matches your requirements the most if you want the process to be successful. However, make sure that you steer clear of any mildew and mold removers that contain toxic chemicals.
Here are some more factors that you should keep in mind while shopping for a mold killer.
Location of Mold
How much do you know about molds and mildews? You need to have an idea of the conditions that they grow in. Otherwise, it’ll be quite troublesome to locate them. Molds and mildews are fungi that tend to grow in damp areas where moisture is abundant.
A dry space will be the last location at which you can expect a mold. Some of the most common places that provide a suitable environment for these fungi’s growth are bathroom tiles and walls. This is because the area is under the constant moisture presence, which enables mold and mildew to grow abundantly.
However, you can encounter these mold spores on other surfaces such as porcelain, concrete, vinyl siding, and on your roof as well. The challenge here is to find a mildew killer that works on all of the surfaces that you have mold growing on.
You’ll have to very careful while choosing a mold and mildew remover. This is because the formula must be suitable for the surfaces you intend to use it on. Otherwise, you may end up damaging your property in an attempt to clean it.
And I’m pretty sure you don’t want that, do you? Therefore, you must be sure about the material or surface you’re going to use the remover on. Hence, it would help if you determined the product’s compatibility with the location you’re going to use before making the purchase.
Time to Clean
Another major factor that you’ll have to consider while buying a mold and mildew remover is the process’s speed. If the remover is slow, you’ll likely have to face many difficulties throughout the day.
This is because the cleaning process will take up a large part of your day. This will, in turn, lead to the completion of other chores later than you expect them to be. Therefore, it is wise to stick with a product that promises fast and visible action within seconds.
Hence, compare the reaction time of the products that you come across. Choosing the one that wraps up the procedure of termination earlier will be a wise choice. Always remember that the speedier the product, the more efficient it is. And you should never spend money on a product that will not make your time productive.
Amount of Product
The composition of the elements in a mold and stain remover solution differs greatly. As a result, the amount of product that you use on a specific mold-infested area also varies. I’d say that the best mold and mildew remover is the one that kills the most molds, even if you use it in a small quantity.
You’ll find both concentrates and ready-to-use mixtures of mold removal solution. However, the concentrates need to be diluted before use, and a valid comparison about the amount can be made only then. A promising formula won’t require much to clean off mildew, so don’t settle for less!
The Best Mold And Mildew Eliminators
Eliminating mold and mildew can be quite a task, and the RMR-141 is one of the best options you could get. This product eradicates fungi, disinfects the surface, and terminates 99% of other harmful microorganisms such as bacteria and viruses. I’m pretty sure that RMR won’t let you down.
Instant Mold And Milder Stain Remover
If you’re looking for a mold killer that will also attack deeply embedded stains and remove them, then the CLR Mold and Mildew Stain Remover will be the right choice for you. The foamy consistency of this product combined with the trigger release handle that it comes with makes it perfect for instant stain removal.
Tilex Mold And Mildew Remover
Clorox is one of the most effective bleaching agents in commercial businesses. The Tilex Mold And Mildew Remover Spray contain the powerful Clorox, which kills mildew and sanitizes the surface immediately after application. Besides that, it also features Smart Tube technology, which will enable you to use every drop of the solution to keep your house safe.
The Best Mold Remover
This is a product that I’ve already mentioned above, and it is none other than the RMR-86. One of the most desirable characteristics of this cleaning product is that you don’t need to scrub or scratch the surface. Spraying it onto the affected area is enough to treat it and make your house spick and span.
Best Organic Mold And Mildew Remover
Some of the most common organic mold and mildew removers include white vinegar, hydrogen peroxide, Borax, baking soda, and Tea Tree Essential oil. However, I’d prefer using white vinegar over the others because not only does the acidity successfully remove mold and mildew, but it also doesn’t contain any poisonous chemicals.
Shower Cleaner For Mold And Mildew
Cleaning mold and mildew off of showers can be troublesome. However, the Skylarlife Mold and Mildew Remover Gel are produced to attack dark stains, specifically in showers. The gel formula is also suitable to use on ceilings since there are no chances of any dripping, making it the best choice for removing fungi from your shower.
Choosing The Best Mold And Mildew Cleaners
There’s no such thing as the best mold and mildew cleaner. This is because a single formula cannot be perfect for the different outdoor and indoor surfaces that molds and mildews grow in. Hence, you have to choose one depending on where you’re going to use the product.
Best Mold And Mildew Remover And Cleaners
As I’ve already mentioned above, whether a mold and mildew remover is suitable for you depends entirely on the surface on which you want to use it. However, some products like the Wet and Forget 10587, the RMR Stain Removal Bundle, and the Star Brite Mold and Mildew Stain Remover are excellent choices for use around your household.
Mold And Mildew Stain Removal
If you’re looking for an organic approach to removing stains left behind by mold and mildew, then you can opt for bleach. You can get the stain removal process done without any professional help by diluting the bleach with water and applying it to the stain. After that, simply leave it for a few minutes and then scrub and rinse the surface with water.
Instant Mold Stain And Mildew Stain Remover
The Star Brite Mold and Mildew Stain Remover can rapidly react with and eradicate the stains of both molds and mildews. It contains a buffered bleach solution and surfactants that fight against grime and grease in the paints. That’s why I’d say that this product by Star Brite is one of the most desirable instant mold and mildew stain removers.
Did you know? Bleach is commonly used as a major component of cleaning solutions that deal with such fungi colonies. However, some manufacturers, such as CLR, try to keep bleach out of the ingredients list. Despite that, their products manage to destroy over 99% of germs and fungal colonies and, therefore, work like those containing toxic chemicals.
Frequently Asked Questions
What is the best product to kill mold?
Do you want to steer clear of synthetic products when it comes to killing mold? While there are many commercial-grade mold killers, white vinegar is fruitful as an organic mold and mildew remover.
The hint of acidity that vinegar contains is enough to wash away mold and freshen the atmosphere. Apart from that, vinegar also sanitizes the surface the kills other disease-causing microbes such as bacteria.
What is the best product for removing mold?
The market is saturated with mold-removing solutions that promise effective killing. However, most of these mold and mildew cleaners do not live up to the claims that they make. Therefore, if you don’t want to be scammed or disappointed, you must purchase from trusted brands.
Among them, some of the best items are the RMR Mold Killer and Stain Remover Bundle, the Clorox Bleach Foamer Bathroom Spray, the Wet and Forget 10587, the CLR Mold and Mildew Stain Remover, and the Concrobium 25326 Mold Control Spray.
How to get rid of mold?
Mold on concrete surfaces like floors, walls, and bathroom tiles can be removed using white vinegar. However, you must not dilute it if you want to use the vinegar’s full potential. If you don’t have or choose not to use vinegar, then bleach is also a great alternative.
If you don’t know how to use bleach, I’d recommend a one-to-one ratio of bleach and water. Therefore, a gallon of water will be sufficient for a single cup of bleaching powder. You can use this mixture on porous surfaces as well.
What does mold smell like?
I’m pretty sure that you’re familiar with the way your house smells. Although not in an unpleasant way, homes have their distinctive smells, don’t they? S fact, noticing a change in the fragrance that you usually take can be relatively easy.
Molds can make your house smell more earthy, a little like the scent you get when rainwater hits soil in the countryside. This musty smell can be a clear indicator that you’ve got a mold infestation. Apart from that, if you have asthma, then molds can cause breathing problems without a good cause.
What is the best bathroom cleaner for mold and mildew?
Bathrooms have the highest chances of being infiltrated with mold. Since mold grows most in places where constant moisture, toilets and showers are the most welcoming to mold growth. As a result, it is also quite difficult to get rid of them from these places.
However, the Clorox Tilex 01100 is a great product that inhibits further growth of mold and mildew in your bathroom. Most products just clean the existing mold, but the Tilex 01100 is a step ahead of those and belongs to a trusted brand.
What kills mold naturally?
Out of the many organic solutions you can opt for, baking soda is one of the most efficient ones. You can either use it with water or vinegar or a combination of the three. All you have to do is add baking soda to a bottle of water or vinegar.
- Shake the bottle and spray it onto the surface carefully.
- Leave the spot alone for a few minutes and allow the solution to work its magic and terminate the mold.
- Scrub the surface and rinse it with water.
Besides that, vinegar on its own can also kill mold naturally.
Final Verdict And Recommendation
I’ve tried to include the maximum amount of information about the best mold and mildew removers in this article. Each of the products mentioned in the list above is from trusted brands with a massive following of delighted customers worldwide.
Therefore, I’d like to think that you’ve found the ideal cleaner for you among the top ten mold killers in 2020. However, make sure you’re confident about your demands from the mold and mildew remover before confirming the purchase. Otherwise, an unfit cleaner will result in nothing more than a waste of time.
Since I don’t know the exact characteristics you require, I can’t recommend any product because they serve a specific purpose. Nevertheless, in my opinion, the Wet and Forget 10587 is an all-rounder mold and algae killer and stain remover that will help you get rid of such microorganisms from almost all the places in your household.
Article Source: en.wikipedia.org